COB 8mm 576LED DC12/24V CRI90 CCT Tunable LED Strip

The strip is listed for DC12/24V at 10+10W/M. Fix one voltage version on the order and use a regulated constant-voltage driver that matches it. Size each branch from its connected meters and follow the driver manufacturer's loading and temperature-derating instructions.

No. 5M/10M is the available supply or reel length. Maximum powered length depends on the exact model, voltage, watts per meter, feed direction, cable resistance, connectors and the accepted voltage drop. Confirm the feed-point plan separately.

Use a tunable-white controller that matches DC12/24V, the strip's common connection and the current required by each channel. Confirm the maximum-load channel state, CCT endpoints, low-end dimming and power-loss behavior with the production-intent driver.

Confirm the profile's usable width, diffuser clearance, mounting surface, connector current rating, cable exit and strain relief. Test the complete assembly rather than approving the strip as a loose reel.

Record model COB-8MM-576LED (RA90) 2line 2Color change and check DC12/24V input and 10+10W/M power, WW+W, 5M/10M, Confirm for selected construction, controller behavior. Add the production-intent driver or rectifier, connector, profile and packaging. The signed specification and retained sample should control later batch inspection.

The quotation, specification sheet and approved sample should identify the same model, electrical rating, construction, reel length and packaging. Record measurable acceptance limits before production rather than relying on a family-level description.