Neon LED 6x12mm AC220V Flexible Strip

IP65 Waterproof COB Strip for Outdoor Use

This silicone-coated COB strip is rated IP65 for outdoor and wet-area applications. Protected against dust, rain, and water spray from any direction — suitable for building facades, outdoor signage, and humid indoor environments. AC direct neon for simplified outdoor installation.

This neon strip is ideal for:

• Building facades, architectural exterior highlights, and outdoor commercial spaces
• Aluminum profile installations, ceiling details, and architectural feature lighting
• Garden pathways, pool surrounds, landscape feature lighting, and outdoor decorative use
• Commercial cove lighting, office ambient lighting, and general business environments

Flexible Neon vs Traditional Glass Neon

Traditional glass neon tubes have been used for signage and decorative lighting for over 100 years, but they come with significant drawbacks that LED neon flex solves:

Feature	Traditional Glass Neon	LED Neon Flex (this)
Power consumption	100+ W/m	7 W/m (93% less)
Voltage	3,000-15,000V	AC220V (safe)
Heat output	Very hot	Cool running
Flexibility	Rigid glass	Bendable (≥20mm radius)
Durability	Fragile	Shock-resistant
Maintenance	High (gas leaks, tube breakage)	Minimal
Installation	Specialist required	DIY-friendly
Lifespan	10,000-15,000 hours	50,000+ hours
Environmental	Contains mercury	RoHS compliant

LED neon flex delivers the same smooth, uniform glow of classic neon lighting with none of the drawbacks. It’s the modern standard for signage, architectural accents, and decorative lighting projects.

Why Neon Flex Looks Different from Standard LED Strips

Standard LED strips show individual LED dots when viewed directly. Even high-density COB strips, while dot-free, produce a visible line of light that doesn’t match the glowing tube appearance of neon.

Neon flex strips place SMD LEDs inside a milky silicone tube. The silicone diffuses the light completely, producing:

• Uniform glow along the entire length — no hot spots or dots
• Classic “neon tube” appearance — indistinguishable from glass neon at a glance
• Side-view lighting — light comes out through the side, not just the top
• Consistent brightness — no brighter or darker spots

This makes neon flex ideal for visible installations where the strip itself becomes part of the design — signage, facade outlines, bar counters, and decorative accents.

AC 220V Direct Connection

This neon strip connects directly to 220V AC mains without any external LED driver or transformer. The AC-direct design provides several practical advantages for large installations:

• Long continuous runs — up to 50 meters from a single power point
• No driver failures — no driver means no driver maintenance
• Simplified wiring — fewer cables and power supplies
• Lower cost — no driver to purchase
• Easy retrofit — direct replacement for existing neon signage

Safety requirement: AC mains installation must be performed by a qualified electrician following local electrical codes. Install appropriate circuit protection (fuses, RCD/GFCI) especially for outdoor or wet-area installations.

Installation Patterns and Applications

Neon flex strips are designed to be bent into shapes for signage and decorative lighting. The flexible silicone allows bending down to a 20mm radius, making it possible to create:

2D shapes:

• Letters and numbers for signage
• Logos and brand marks
• Geometric patterns
• Curved architectural outlines

3D installations:

• Building facade perimeters
• Under-counter bar lighting
• Step and handrail lighting
• Ceiling cove curves

Important bending rules:

• Only bend along the thin axis (the 20mm dimension for 6×12mm strip)
• Do NOT bend along the thick axis (would damage internal LEDs)
• Minimum bend radius: 20mm (approximately the diameter of a coin)
• For sharp angles, use pre-cut segments joined with connectors
• Use custom pre-bent shapes for signage — we offer this as an OEM service

Technical Considerations

Waterproof rating (IP65): This neon strip is rated for outdoor and wet-area use. The silicone body prevents water ingress, making it suitable for:

• Outdoor building facades in rain and snow
• Landscape lighting in gardens and pool surrounds
• Bathroom and kitchen decorative lighting
• Humid indoor spaces (saunas, greenhouses, spas)

For permanent underwater installation (swimming pools, fountains), consider our IP68 flexible silicone strip product line.

Temperature range (-30°C to +50°C): The strip maintains flexibility and functionality across a wide temperature range:

• Cold weather durability — works in Northern European winters down to -30°C
• Heat resistance — handles Middle East summer heat up to +50°C
• UV resistance — silicone body prevents yellowing under direct sun

Cutting and connection:

• Cut only at marked 1-meter intervals (every 1 meter)
• Seal cut ends with the included silicone end caps
• Use waterproof connectors for power connection
• Field cutting must be performed carefully to avoid damaging internal components

Installation Best Practices

• Use mounting clips spaced 200-300mm apart along the strip length
• Do not over-tighten clips — allow for thermal expansion
• Leave slack at corners and curves to prevent stress
• Seal all cut ends immediately after cutting to maintain waterproofing
• Test before permanent installation — power up briefly to verify function
• Qualified electrician required for AC mains connections

Packaging and Shipping

• Reel length: 50M per reel
• Master carton: 50 meters per carton
• End caps and clips: included in packaging
• Container capacity: approximately 40,000-45,000 meters per 20ft container
• Protective packaging prevents deformation during transit